Welcome to the website of Jiangsu Sufeng Machinery Technology Co. Ltd.!

未标题-1.jpg  未标题-1.jpg

National Service Hotline

138-1343-9188

大拉退火装置

news

contact

Jiangsu Sufeng Machinery Technology Co., Ltd.

Contact person: Jin total 13813439188

Ligong 1396 1999728

Tel: 0515-88668006

Fax: 0515-88668488

Email: sufengkeji@126.com

Website: www.sufkj.com

Website: en.sufkj.com

Address: Hongxing Industrial Concentration Zone, Yifeng, Yancheng City, Jiangsu Province


A Wire Drawing Annealing Device

Your current location: Home >> News >> Frequently Asked Questions

A Wire Drawing Annealing Device

Date of release:2016-07-27 Author: Click:

大拉退货装置厂家


The large-scale quenching equipment for copper core wire consists of a large drawing machine (1), a copper core wire (2), a housing (3), a high-temperature maintenance gas injection port (4), an electric heating device (5), a wiring wheel (6), a protective plate (7), an annealing wheel (8), a water cooling tank (9) and a refrigerant (10). Its characteristics depend on the interconnection of the output end of the large drawing machine (1) with the copper core wire (2). The copper core wire (2) passes through the quenching equipment of the equipment housing (3) envelope, the equipment housing (3) has a high temperature maintenance gas injection port (4) at the top, the protective plate (7) divides the quenching equipment into quenching zone and non-quenching zone, and the electric heating device (5) divides the non-quenching zone into heating zone in the electric heating device (5) and heat insulation zone outside the electric heating device (5). The copper core wire (2) passes through the heating zone inside the electric heating device (5) before entering the heat insulation and heat preservation zone in the quenching equipment.

Copper core wires (2) in residential areas with heat insulation and heat preservation are connected with several wiring wheels (6) and then passed through small round holes on the protective plate (7) to the quenched area. Copper core wires (2) in quenched residential areas undergo several opinions of annealing wheels (8) from high to low temperature successively. Copper core wires (2) after all annealing wheels (8) of the manufacturer of large pulling and returning device enter at a lower temperature. The electric heating device (5) has a high frequency electromagnetic coil (51); the wiring wheel (6) includes a bearing end cover (61), a wiring wheel management center hole (62), a wiring wheel limit switch slot (63), a wiring wheel diaphragm (64), a rotary rolling bearing (65), a precise positioning key (66) and a fixing device. Fixed axle (67), in which the limit switch groove (63) of the wiring wheel is located on the outer layer of the wiring wheel (6), the cross section of the limit switch groove (63) of the wiring wheel is arced, the total width of the limit switch groove (63) of the wiring wheel exceeds the diameter of the copper core line (2), there are two wiring wheel diaphragms (64), and the driving axle of the vertical horizontal distribution wheel (6) of the wiring wheel diaphragm (64) is situated side by side. On both sides of the wiring wheel (6), the wiring wheel management center hole (62) is located at the management center part of the wiring wheel separator (64).

The wiring wheel management center hole (62) is connected with two wiring wheel diaphragms (64), the wiring wheel management center hole (62) is connected with the rotary rolling bearing (65) according to the precise positioning key (66), the end cover of the shaft bearing (61) is transitively matched with the rotary rolling bearing (65), and the inner ring of the rotary rolling bearing (65) is transitively matched with the fixed fixed shaft (67); the above protective plate (7) is insulated by heat preservation. The annealing wheel (8) consists of annealing wheel separator (81), annealing wheel limit switch groove (82), resistor electromagnetic coil (83), current controller (84), transmission line (85), positive connection head (86) of switching power supply, and opening. The annealing wheel diaphragm (81) is annular, the diameter of annealing wheel diaphragm (81) exceeds the arc of annealing wheel (8), the arc of annealing wheel (8) is surrounded by a continuous annealing wheel limit switch slot (82), and the arc of annealing wheel (8) is equipped with a resistor electromagnetic coil (83).

The two sides of the resistor electromagnetic coil (83) are connected by the transmission line (85) to the positive connector (86) and the negative connector (87) of the switching power supply. A current controller (84) is also installed on the transmission line (85) between the positive connector (86) of the switching power supply and the resistor electromagnetic coil (83), and a temperature display (88) is installed on the annealing wheel separator (8). The temperature display (88) is a liquid crystal display digital display screen, and the temperature of the refrigerant (10) water-cooled copper core wire (2) is 50-70 C.


The address of this article:http://en.sufkj.com/news/370.html

Key word:大拉退货装置厂家,中大拉退货装置厂家,中拉退货装置厂家

Recently browse:

1566819744892274.png

Consultation:13813439188

mailbox:sufengkeji@126.com

add:Yifeng Hongxing Industrial Concentration...

Tpl:0515-88668006

Website:www.sufkj.com

未标题-2.jpg

Copyright@Jiangsu Sufeng Machinery Technology Co. Ltd..                     Technical Support: SkyNet

  • Service
  • number
    13813439188
  • Message
  • Online Service